Operating Area Povodí Vltavy Offices / ATELIER 8000


© Jan Mahr

© Jan Mahr
  • Architects: ATELIER 8000
  • Location: Ceske Budejovice, Czech Republic
  • Architect In Charge: Martin Krupauer, Jiří Střítecký
  • Area: 2075.0 sqm
  • Project Year: 2014
  • Photographs: Jan Mahr


© Jan Mahr


© Jan Mahr


© Jan Mahr


© Jan Mahr


© Jan Mahr

© Jan Mahr

From the architect. A closed complex of modernized and new buildings meets the needs of a modern industrial works. There is a new office building close to the river and a bike path, and a repair hall with a crane runway and workshops by the road. Grown trees separate both parts of the complex.


© Jan Mahr

© Jan Mahr

The complex will substantially upgrade the original deteriorated condition – green areas will be larger complemented new pathways. The shape and size of buildings respond to the natural shape of the lot and copy its borders. Buildings are mutually positioned to establish differentiated environment outside and inside the area and a screen visually and functionally separating the industrial complex from the main roads.


© Jan Mahr

© Jan Mahr

Sections

Sections

© Jan Mahr

© Jan Mahr

By its morphology and traditional building materials – wood, concrete, glass and steel structures for shading sails/screens – the oblong office building evokes the relation of the business with water and with water structures. The main wall is clad in wood and window openings cut through it act as a flood barrier at the same time. It is continued by a glazed part, shaded by a system of independent sails set in front and terminated by a reinforced concrete gable roof.


© Jan Mahr

© Jan Mahr

http://ift.tt/24qiZnL

A449 converts Scottish cottage into writer’s home with scorched larch cladding



Edinburgh practice A449 has adapted a “nondescript” mid-20th-century dwelling in the Scottish Borders to create a home with scenic views for a writer (+ slideshow). (more…)

http://ift.tt/21k3hsq

Architecture could finally break out in San Francisco, where “dreams go to die”



When it comes to contemporary architecture, San Francisco is a stubborn town. But could change be coming at last? Proposals by high-profile architects such as OMA, Studio Gang and Foster + Partners could bring a more dramatic skyline and a transformed waterfront – if San Francisco’s notoriously persnickety planning system and pressure groups let them (+ slideshow). (more…)

http://ift.tt/26C16UT

Will A UK Power Station Become the Most Expensive Thing Ever Built?


Existing Nuclear Power Station at Hinkley Point. Image © Image Courtesy of Wikipedia User: Richard Baker licensed under CC BY-SA 3.0

Existing Nuclear Power Station at Hinkley Point. Image © Image Courtesy of Wikipedia User: Richard Baker licensed under CC BY-SA 3.0

“What is the most expensive object on Earth?” posits an article by Ed Davey published by the BBC. A new nuclear power station being being in the south west of the United Kingdom may well end up holding the title. At £24 billion ($35 billion) Davey estimates, “you could build a small forest of Burj Khalifas – the world’s tallest building, in Dubai, cost a piffling £1bn ($1.5bn).” The article later compares the construction to other projects like bridges and particle accelerators, as well as historic precedents like the Great Pyramid of Giza, the Great Wall of China, Hong Kong International Airport, or the International Space Station – the last of which cost a whopping $110 billion. But comparing monumental building and engineering projects comes with some caveats, such as: “what is strictly an individual object?” “Is cost measured by today’s values or those at the time of construction?” “Are we talking about modern methods or those used historically?” Read the full article here.

http://ift.tt/23euoo3

BIG designs modular Alphabet of Light for Artemide



Milan 2016: Danish firm BIG has created a modular lighting system that can be rearranged to form different letters of a bespoke typeface. (more…)

http://ift.tt/26BXeDp

US job of the week: designer/architect at Design, Bitches

Dezeen Jobs architecture and design recruitment

Our US job of the week on the new and improved Dezeen Jobs website is for an architect/designer at Design, Bitches in Los Angeles, whose recent projects include Button Mash – an Asian-fusion restaurant and video arcade (pictured). Visit the ad for full details or browse other architecture and design opportunities on Dezeen Jobs.

http://ift.tt/26BMvca

Coupled Wagon House / Crescente Böhme Alemparte


© Fernanda del Villar Jiménez

© Fernanda del Villar Jiménez


© Fernanda del Villar Jiménez


© Fernanda del Villar Jiménez


Courtesy of Crescente Böhme Alemparte


© Fernanda del Villar Jiménez


© Fernanda del Villar Jiménez

© Fernanda del Villar Jiménez

From the architect. Based in Cartagena, Valparaiso Chile, the project is located in a subdivision area, small plots and home built by their owners. The exact site is a parcel of land of approximately 10 x 20 meters, with a gradient of approximately 15% that runs along the lots from east to west.


First Floor Plan

First Floor Plan

The land has been inhabited (or occupied) for the last ten years by a train car. It worked as a sleeping wagon, and recently adjusted to something like a stationary home living place by an old lady who used to work as an English teacher, and who lives alone since 2010.


Courtesy of Crescente Böhme Alemparte

Courtesy of Crescente Böhme Alemparte

Courtesy of Crescente Böhme Alemparte

Courtesy of Crescente Böhme Alemparte

Because of the land, since its very narrow, and its rare in front of the sea, the train car was re-located  along its diagonal , seeking a foreshorteningview of the sea , but with no success given the conditions of the land itself.


© Fernanda del Villar Jiménez

© Fernanda del Villar Jiménez

The requirement is modest but significant, it has been asked to extend the zone inhabited and sum a bedroom, living room, bathroom and a terrace in a space of no more than 35 M2. Therefore we design a strategy which consist in building   a metallic squared table of 6.2 x 5.3 meters, as far as it can be from the front, passing under the train car, and set up a volumetrically independent body above it, all interconnected by interior stairs.


Model

Model

Section

Section

We thought of a neutral and contemporary esthetic, trying to make -and highlight-   a difference with the train car, while it allows to conserve its identity and presence by contrast. However, and despite their difference, there are two elements taken from the image of the train car, in an attitude of rescuing and re-interpreting its preexistence: steel and wood. Thus, in order to achieve this idea, we designed a structure based in pillars and diagonals of steel, as the support of the volume sheathe by wooden slats and painted in black to highlight the red in the train car.


© Fernanda del Villar Jiménez

© Fernanda del Villar Jiménez

http://ift.tt/1rFBneC

“Designers cannot just stand by and watch as the refugee crisis unfolds”

Richard-van-der-Laken-what-design-can-do-opinion_dezeen_sqc

Opinion: designers can’t save the world, but even the smallest intervention could help improve the conditions faced by the unprecedented number of refugees flooding Europe, says Richard van der Laken. (more…)

http://ift.tt/1SzdEGr

Competition: win a hand-cast Herringbone vase by Phil Cuttance



Competition: London-based designer Phil Cuttance has teamed up with Dezeen to give one reader a handmade vase, featuring a raised herringbone pattern. (more…)

http://ift.tt/249RB0w

Marc Fornes / THEVERYMANY Design “Spineway” in San Antonio


Courtesy of Marc Fornes / THEVERYMANY

Courtesy of Marc Fornes / THEVERYMANY

Marc Fornes/THEVERYMANY has unveiled “Spineway”, a permanent public artwork commissioned by the City of San Antonio in Woodlawn Lake Park. Calling to mind the midcentury marvels of Alexander Calder or Mark di Suvero, Spineway has been digitally fabricated with custom computational protocols of structural form-finding and descriptive geometry. As with past projects by Mark Fornes/THEVERYMANY the studio posits, “Spineway is consistent with the studio’s approach of exploring structural performance while catalyzing public places through dynamic and unique spatial experiences.”


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


© Texas By Air


Courtesy of Marc Fornes / THEVERYMANY


© Texas By Air

© Texas By Air


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY

Although mimicking the construction methods of segmental bridges in its use of prefabricated pieces, Spineway has been built on the scale of a neighborhood. According to the studio, “The interdependent structural network is comprised of interdependent catenary arches, in which the stresses and loads of each depend on one another as part of a complete system. It is made of 1,009 1⁄8” aluminum shingles, fastened together by 19,429 rivets.” The sculpture touches the ground on 12 precast concrete feet, on top of a weblike grid of concrete inlay.


Courtesy of Marc Fornes / THEVERYMANY

Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY


Courtesy of Marc Fornes / THEVERYMANY

Erected over the course of five days, the lightweight and long-lasting structure is painted 22 shades of blue and green. Marking the conclusion of Cincinnati Avenue Corridor and the beginning of the Park-University Corridor, the sculpture acts as a bridge to adjacent neighborhoods. It is also an iconic gateway to San Antonio’s Woodlawn Park, a destination that has been inviting city dwellers for over 100 years.

http://ift.tt/1TjLVWD